Tel:+86-0310-5506519 E-mail:enquiry@ht-corp.cn Whatsapp:+86 19913018867
products
Contact us
Tel: +86-19913018867
Tel: +86-0310-5506519
E-mail: enquiry@ht-corp.cn
Address: North Carbon Base of Handan Expressway, Handan City
UHP 700mm Graphite electrode
Graphite Electrode (UHP)
Ultra-high power graphite electrode provided by Hebei Haiteng New Materials Technology Co.,Ltd. is mainly specialized for electric arc furnace and ladle refining furnace. It is highly praised by the customers as the rare superior type of ultra-high power graphite electrode with optimal functional quality in the industry. The graphite electrodes provided by Hebei Haiteng New Materials Technology Co.,Ltd. are produced using the most advanced technologies, in strict accordance with world standards and have reached the world-class quality standard of SGL CARBON and Tokai Carbon.
Characteristics of ultra-high power graphite electrodes:
1、Superior electric conductivity
2、World-class quapty
3、Complete ex-factory inspection
4、Rate of finished products up to 99%
5、Complete use instructions and all-round customer service
Unconditional return is provided in case of quapty problem by Hebei Haiteng New Materials Technology Co.,Ltd. to completely epminate your worries!
DESCRIPTION
UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.
In order to meet the requirement of higher work efficiency and lower total cost, large capacity ultra-high power arc furnaces are becoming more and more popular. Because of this, UHP graphite electrodes with diameters of over 500 mm will dominate market.
FEATURE
Withstand large currents, high discharge rate.
Good dimension stability, not easy to deform.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
High mechanical strength, low electrical resistance.
High machining accuracy, good surface finishing.
APPLICATION
Graphite electrodes are widely used for production of alloy steels, metal and other nonmetallic materials, etc.
DC electric arc furnace.
AC electric arc furnace.
Submerged arc furnace.
Ladle furnace.
SPECIFICATION
Table 1: Technical Specification of UHP Graphite Electrode
| Dia. | Resistance | Density | Flexure Strength | Elastic Modulus | Ash Content | CTE | Current Load | Current Density |
| (inch) | (≤, µΩ·m) | (≥, g/cm3) | (≥, MPa) | (≤, GPa) | (≤, %) | (100 °C – 600 °C) | (A) | (A/cm2) |
| (≤, 10-6/°C) | ||||||||
| 10 | 5.2 | 1.67 | 10.5 | 14 | 0.3 | 1.5 | 8100–12200 | 20–30 |
| 12 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 15000–22000 | 20–30 |
| 14 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 20000–30000 | 20–30 |
| 16 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 25000–40000 | 19–30 |
| 18 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 32000–45000 | 19–27 |
| 20 | 5.2 | 1.70 | 11 | 14 | 0.3 | 1.4 | 38000–55000 | 18–27 |
| 22 | 5.2 | 1.72 | 11 | 14 | 0.3 | 1.4 | 42000–66000 | 17–26 |
| 24 | 4.8 | 1.72 | 11 | 14 | 0.3 | 1.4 | 49000–76000 | 17–26 |
Table 2: Graphite Electrode Size & Tolerance
| Diameter (mm) | Length (mm) | ||||||
| Nominal Diameter | Actual Diameter | Nominal Length | Tolerance | Short Length | |||
| (inch) | (mm) | (max.) | (min.) | (rough spot) | |||
| 10 | 250 | 256 | 251 | 248 | 1600/1800 | ±100 | -275 |
| 12 | 300 | 307 | 302 | 299 | 1600/1800 | ||
| 14 | 350 | 357 | 352 | 349 | 1600/1800 | ||
| 16 | 400 | 409 | 403 | 400 | 1600/1800/2000/2200 | ||
| 18 | 450 | 460 | 454 | 451 | 1600/1800/2000/2200 | ||
| 20 | 500 | 511 | 505 | 502 | 1800/2000/2200/2400 | ||
| 22 | 550 | 562 | 556 | 553 | 1800/2000/2200/2400 | ||
| 24 | 600 | 613 | 607 | 604 | 2000/2200/2400/2700 | ||
SURFACE QUALITY
There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.
There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.
The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.
| SpecificationDefect Dimension | Nominal Diameter of Graphite Electrode (mm) | |
| 300–400 | 450–600 | |
| Diameter (mm) | 20–40 | 30–50 |
| (< 20 mm should be negligible) | (< 30 mm should be negligible) | |
| Depth (mm) | 5–10 | 10–15 |
| (< 5 mm should be negligible) | (< 10 mm should be negligible) | |
Leave us a message
SHARE WITH YOU
Until now we have exported our products to more than 30 countries of the world. The encouragement from our customer’s trust let us increase the production capacity and keep competitive. All stuff of Hebei Haiteng will take our best to build win-win cooperation with you.
