Tel:+86-0310-5506519 E-mail:enquiry@ht-corp.cn Whatsapp:+86 19913018867
products
Contact us
Tel: +86-19913018867
Tel: +86-0310-5506519
E-mail: enquiry@ht-corp.cn
Address: North Carbon Base of Handan Expressway, Handan City
Carbon graphite electrode
Graphite Electrode (HP)
Hebei Haiteng New Materials Technology Co.,Ltd. is an industry-leading manufacturer that integrates manufacture, marketing, export and supply of high power graphite electrodes in extensive applications. Hebei Haiteng New Materials Technology Co.,Ltd. has always been advocating the use of better materials and more advanced production processes to reduce energy consumption and material costs.
The high power graphite electrodes produced by Hebei Haiteng New Materials Technology Co.,Ltd. have the following characteristics:
1、High bulk density
2、Low power consumption
3、Relative high electric conductivity
4、Free consultation for installation
5、Whole-process after-sales follow-up
6、Unconditional return in case of quality problem
DESCRIPTION
HP graphite electrode is the conducting element for electric arc furnaces steelmaking. It is made of petroleum coke, needle coke, coal pitch and produced by a series of strict production processes. High-current lines insert through the graphite electrode port inside the furnace body. This will releases electric energy in the arc furnace to heat the furnace.
The demand for the larger diameter electrodes has been increasing as EAF furnace sizes become larger. Graphite electrodes with diameter of 500 mm or 600 mm have become increasingly popular in recent years.
FEATURE
Anti-oxidation treatment for longevity.
High-purity, high-density, strong chemical stability.
High machining accuracy, good surface finishing.
High mechanical strength, low electrical resistance.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
APPLICATION
Graphite electrodes are widely used for production of alloy steels, metal and other nonmetallic materials, etc.
DC electric arc furnace.
AC electric arc furnace.
Submerged arc furnace.
SPECIFICATION
Table 1: Technical Specification of HP Graphite Electrode
| Diameter | Resistance | Density | Flexure Strength | Elastic Modulus | Ash Content | CTE | Current Load | Current Density | |
| (≤, µΩ·m) | (≥, g/cm3) | (≥, MPa) | (≤, GPa) | (≤, %) | (100 °C – 600 °C) | (A) | (A/cm2) | ||
| inch | mm | (≤, 10-6/°C) | |||||||
| 8 | 200 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 5500–9000 | 18–25 |
| 9 | 225 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 6500–10000 | 18–25 |
| 10 | 250 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 8000–13000 | 18–25 |
| 12 | 300 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 13000–17400 | 17–24 |
| 14 | 350 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 17400–24000 | 17–24 |
| 16 | 400 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 21000–31000 | 16–24 |
| 18 | 450 | 6.0 | 1.65 | 10.5 | 12 | 0.3 | 2.4 | 25000–40000 | 15–24 |
| 20 | 500 | 6.0 | 1.65 | 10.5 | 14 | 0.3 | 2.2 | 30000–48000 | 15–24 |
| 22 | 550 | 6.0 | 1.64 | 10.5 | 14 | 0.3 | 2.2 | 37000–57000 | 15–23 |
| 24 | 600 | 6.0 | 1.64 | 10.5 | 14 | 0.3 | 2.2 | 44000–67000 | 15–23 |
Table 2: Graphite Electrode Size & Tolerance
| Diameter (mm) | Length (mm) | ||||||
| Nominal Diameter | Actual Diameter | Nominal Length | Tolerance | Short Length | |||
| (inch) | (mm) | (max.) | (min.) | (rough spot) | |||
| 8 | 200 | 205 | 200 | 197 | 1600 | ±100 | -275 |
| 9 | 225 | 230 | 225 | 222 | 1600 | ||
| 10 | 250 | 256 | 251 | 248 | 1600/1800 | ||
| 12 | 300 | 307 | 302 | 299 | 1600/1800 | ||
| 14 | 350 | 357 | 352 | 349 | 1600/1800 | ||
| 16 | 400 | 409 | 403 | 400 | 1600/1800/2000/2200 | ||
| 18 | 450 | 460 | 454 | 451 | 1600/1800/2000/2200 | ||
| 20 | 500 | 511 | 505 | 502 | 1800/2000/2200/2400 | ||
| 22 | 550 | 562 | 556 | 553 | 1800/2000/2200/2400 | ||
| 24 | 600 | 613 | 607 | 604 | 2000/2200/2400 | ||
SURFACE QUALITY
There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.
There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.
The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.
| SpecificationDefect Dimension | Nominal Diameter of Graphite Electrode (mm) | |
| 300–400 | 450–600 | |
| Diameter (mm) | 20–40 | 30–50 |
| (< 20 mm should be negligible) | (< 30 mm should be negligible) | |
| Depth (mm) | 5–10 | 10–15 |
| (< 5 mm should be negligible) | (< 10 mm should be negligible) | |
| project | unit | HP Graphite Electrode Physical and Chemical Index | ||
| ≤φ400 | ≥φ450 | |||
| Resistivity | electrode | μΩ.m | 5.2-6.3 | 5.3-6.5 |
| Connector | 3.5-4.5 | |||
| Flexural strength | electrode | Mpa | 10.5-15 | 10.5-15 |
| Connector | 20-26 | |||
| Elastic Modulus | electrode | Gpa | 9.0-12.0 | |
| Connector | 13-18 | |||
| Bulk density | electrode | g/cm3 | 1.65-1.76 | |
| Connector | 1.75-1.81 | |||
| Coefficient of thermal expansion CTE (100℃-600℃) | electrode | 10-6/℃ | 1.6-1.8 | |
| Connector | 1.3-1.5 | |||
| Ash | electrode | % | 0.2 | |
| Connector | ||||
Leave us a message
SHARE WITH YOU
Until now we have exported our products to more than 30 countries of the world. The encouragement from our customer’s trust let us increase the production capacity and keep competitive. All stuff of Hebei Haiteng will take our best to build win-win cooperation with you.
