The anode of the electrolytic aluminum plant is a consumable. Every time the electrolytic aluminum plant works for a period of time, it will produce a batch of customized carbon anode scrap material, which is called residual electrode. After being broken, it will become granular and grinding residual electrode slag. The main component of these electrolytic customized carbon anode scrap material is carbon. It is used as the anode of the electrolytic cell and can no longer be used for its original purpose. However, after being broken and processed, it can be used as customized carbon anode scrap material for production and fuel combustion. However, a certain amount of electrolyte, iron and other impurities mixed in the residue reduce its practical value. High quality carbon blocks can be separated from these customized carbon anode scrap material through beneficiation methods and equipment. With high calorific value, they can be used as high-quality fuel. Therefore, someone specially recovers customized carbon anode scrap material of aluminum electrolysis plants to recover the carbon blocks. How to recover the carbon blocks from customized carbon anode scrap material? Next, the Best carbon anode scrap factory will introduce a simple and feasible method.

In the past, people recovered carbon blocks from customized carbon anode scrap material mainly through manual picking. Because there are obvious differences in the color of carbon blocks, electrolytes and other impurities, impurities with different colors can be selected through observation to obtain pure carbon blocks. However, this method has great limitations. First, there are clear requirements for the size of carbon blocks to be selected. Carbon blocks with a size lower than 20mm have very low sorting efficiency and poor results, Due to the high labor intensity, it is impossible to manually sort fine particles. Therefore, a method and equipment that can effectively separate coarse, medium and fine carbon blocks are needed. It is recommended here that the jig is a gravity dressing equipment that can separate useful minerals and gangue according to the specific gravity difference. According to its principle and characteristics, we can use it to separate impurities in carbon blocks, but it is different from the traditional jig separation, Because the specific gravity of carbon blocks is small and the specific gravity of impurities is large, when the jigger is used to separate carbon blocks and impurities, the useful carbon blocks are actually discharged from the tailings mouth of the jigger, while the useless impurities are discharged from the concentrate mouth of the jigger, but this does not affect the normal separation effect of the jigger.

The jigs are divided into many different models. 0-50mm coarse, medium and fine customized carbon anode scrap material can be fed into the jigs for sorting, and the carbon blocks can be effectively recycled. This can not only improve the sorting efficiency of carbon blocks, reduce the sorting cost, but also greatly improve the sorting quality, so as to meet the needs of customers.